Ⅰ、This product is an outdoor surveillance camera without power connection,no wiring, simple installation and ready-to-use installation.
Ⅱ、Core selling point：
1.No electricity required:Solar and battery powered；
2.No wiring needed:No need to thread wall, chisel a hole or destroy decoration;
3.Supported Off-line operations :Be monitored without networking；
4.Remote viewing: WIFI network can be viewed remotely;；
5.Human induction:Take photos immediately upon inducing people；
6.Privacy Protection: Local storage, no leaks; 7.Induction street lamp:Sensing people at night,the lights will be automatically activated；
8.Simple installation: self installation, no need to invite professional construction staff;
Ⅲ、Application Scope:Doorstep, Courtyard，Fishpond, Orchard, Farm, Mine, Construction site and all places where it is not convenient to receive electrical wiring.
| Product Name: | Solar IP camera | |
|---|---|---|
| Model: | YN60-WIFI | |
| color: | White | |
| Induction principle: | HMD（Human Motion Detection） | |
| Master chip: | Hi3518EV200 ARM926@800MHz | |
| Sensor type: | F23 2.0MP 1/2.9" CMOS sensor | |
| WIFI module: | Hi1131 | |
| WIFI agreement: | WIFI 2.4GHz， IEEE 802.11 b/g/n | |
| Effective pixels: | 2MP | |
| Image size : | 1920*1080 | |
| Focal length: | 4mm（Optional 2.8mm/6mm/8mm/12mm） | |
| Photographic distances: | 0-15meters | |
| Shooting angle: | 70º | |
| Response time: | 0.6S | |
| Battery capacity: | 5200mAh | |
| Solar panel power: | 1.8W（Detachable, optional 3m extension cord） | |
| Max Charge Current : | 456mA | |
| Night mode: | White light (fill light) and infrared manual switching (factory default white light mode) | |
| White light power: | 2W LED 1W*2 | |
| Infrared power: | 2W LED 1W*2 | |
